Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Alternator from the Opel Antara V6

Model: Vauxhall Antara MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Alternator

Video tutorial

This guide outlines the steps to remove and replace the alternator on the Opel Antara V6, as well as the Chevrolet Captiva. First, raise the vehicle and disconnect the auxiliary belt.

Then, disconnect the pipe located near the belt to access the alternator, as shown in the video. Next, unscrew the fixing bolts of the belt tensioner to remove it. Unscrew the bolts of the alternator and disconnect the electrical wiring, replacing it with the new one. Follow the reverse procedure for reassembly!


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from an Opel Antara
How to Remove the Steering Wheel Airbag from an Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Before you can begin, disconnect the positive terminal of the battery of your Opel Antara to work safely. Start by sitting in the driver's seat, then…
How to Replace the Dipped Beam Bulb on the Opel Antara
How to Replace the Dipped Beam Bulb on the Opel Antara
Vauxhall Antara (2006-2015 / MK 1) To replace the dipped beam bulb on the Opel Antara, start by removing the 3 caps on the side of the bulb that hold the front grille, unscrew the 3 bo…
How to Remove the Radio from the Opel Antara
How to Remove the Radio from the Opel Antara
Vauxhall Antara (2006-2015 / MK 1) If you want to remove the factory radio from your Opel Antara, just follow the instructions in this new mini guide. First, obtain a pair of thin meta…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos