Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from the Opel Corsa?

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Door trim panel

In this tutorial, you will learn how to remove the door panel from the Opel Corsa E, an extremely simple and quick operation. First, remove the small panel located inside the opening handle, then unscrew the screw underneath and the others along the outer edge. Once this is done, unclip the cover of the armrest, remove the window switch, and unscrew the last two screws. At this point, you can start to separate the panel from the door by prying along the seam, starting from the bottom, until it is completely removed.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the internal handle of the front door of the Opel Corsa
How to change the internal handle of the front door of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions that will allow us to disassemble and replace the inner handle of the front door of the Opel Corsa. First, we open the fro…
How to Remove the Door Panel of the Opel Corsa D
How to Remove the Door Panel of the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this new mini guide, we will describe all the steps you need to follow if you intend to remove the door panel of your Opel Corsa D yourself. First…
How to Remove the Door Panel in the Opel Corsa?
How to Remove the Door Panel in the Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) Removing the door panel in the Opel Corsa is an extremely simple and quick task. First, open the door you will be working on, then unclip the entire …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos