Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of External Wing Mirror Glass

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Side mirror

Breaking just the glass of the external wing mirror can happen when passing another vehicle on a narrow road. Fortunately, this issue can be easily and economically resolved as you can purchase just the glass from the aftermarket instead of the entire mirror. The replacement is straightforward; detach the glass by levering from the rear, then disconnect the heating wires. Bring the new glass close, connect the wires, align the tabs with the support, and press to secure it in place.

Updated on 18 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of External Wing Mirror Glass
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the glass of the external wing mirror is very easy and economical, as the replacement part is readily available in the aftermarket. Rotate …
Replacing the Wing Mirror on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the external wing mirror on an Opel Corsa. Use a plastic lever to pry between the perimeter of the mirror frame and the mirror glass. Pry u…
Replacement of External Wing Mirror Glass
Vauxhall Corsa (2006-2014 / Corsa D) The glass of the external wing mirror is simply clipped onto its support using thin metal tabs. To replace it, adjust the mirror fully inwards to cre…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos