Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repainting the mirror caps of the Opel Corsa.

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Side mirror

In order to remove the cover of the external rearview mirror, the first thing to do is to adjust the mirror (meaning the glass) turned inward, so that you can fit your fingers or a small screwdriver and remove it from its housing. There are three fittings for the cover, one at the bottom, one at the top, and one on the side. Now we need to sand the two covers to remove the previous paint and apply a coat of plastic primer. Let it dry and apply the first coat of glossy black paint; let it dry completely and apply the second coat as well. Then apply a coat of clear polish. We can then reassemble the covers in their place.

Posted on 17 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Mirror on an Opel Corsa
How to Replace the Side Mirror on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How do you replace the wing mirror on an Opel Corsa? Follow these steps. Using a plastic or rubber trim tool, pry between the edge of the mirror fram…
How to replace the mirror mirror of an Opel Corsa
How to replace the mirror mirror of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Let's see how to remove the exterior mirror glass on Opel Corsa. With a lever (plastic or rubber coating) we go to pry between the perimeter of the m…
How to remove the internal rearview mirror of the Opel Corsa
How to remove the internal rearview mirror of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Removing the interior mirror of the Opel Corsa model D is a really simple and quick operation to perform, thanks to our short tutorial that will illu…

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos