Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

In this tutorial, you will see how to reset the tyre warning light on the Opel Mokka, a very simple and quick operation. To do this, you will need the appropriate scanner, which can also be found online. First, turn on the instrument cluster, then enter the general menu by holding down the specific button on the left control lever. Scroll through the various screens until you reach the one related to the pressures and press the "SET/CLR" button on the same lever. At this point, position the scanner in front of the left front valve, activate it, and repeat this last step for the remaining three tyres, moving in a clockwise direction.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
How to Reset the Tyre Pressure Warning Light on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the tyre pressure warning light on an Opel Mokka, first inflate all tyres to the recommended pressure values, which are listed on the sticke…
How to Reset the Tyre Pressure Light on an Opel Mokka?
How to Reset the Tyre Pressure Light on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) The tyre pressure light displayed on the instrument cluster of the Opel Mokka can be cleared by first inflating all the tyres until they reach the re…
How to Reset the Tyre Pressure Warning Light on an Opel Mokka
How to Reset the Tyre Pressure Warning Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) This guide shows how to reset the tyre pressure warning light on the Opel Mokka. The first step is to turn on the ignition and, using the "Menu" butt…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos