Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Front Headlight Clips on an Opel Agila

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Headlight

The clips for the front headlights on an Opel Agila can no longer support the weight of the headlight, and while waiting for new clips, the headlight continues to move. The only solution is to secure them, but how? Today, in this short video tutorial, you will learn how to temporarily resolve this issue. All you need to do is remove the front bumper cover and open the bonnet. Once done, you can use "STRUCTURAL ADHESIVE" to glue the clips to the headlight so that they no longer move, and then secure them in their housing. Perform the same operation for the right headlight. Refit the front bumper and close the bonnet.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on an Opel Agila B
Where to Find the OBD Port on an Opel Agila B
Vauxhall Agila (2008-2015 / Agila B) If you are looking for the OBD port on your Opel Agila B but haven't found it yet, just follow these steps. First, get inside the vehicle and reach t…
How to Replace the Engine Air Filter on the Opel Agila A
How to Replace the Engine Air Filter on the Opel Agila A
Vauxhall Agila (2000-2007 / Agila A) Keeping the engine air filter clean and efficient will certainly ensure excellent performance and fuel consumption; it is good practice to periodical…
How to Remove the Rear Light of an Opel Agila
How to Remove the Rear Light of an Opel Agila
Vauxhall Agila (2008-2015 / Agila B) Before you can start, exit the cabin of your Opel Agila and head to the rear of the vehicle. Begin by opening the boot. Next, unscrew and remove the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos