Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Zafira
  6. : Replacement of the fuel pump for the Opel Zafira.

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Fuel pump
Operation: Replacement of the fuel pump for the Opel Zafira.

Below we will see the instructions that will allow us to disassemble and replace the fuel pump of the Opel Zafira, following these simple steps. First, it will be necessary to remove the vehicle's fuel tank by unscrewing all the fixing screws of the brackets; once removed from the frame, we can disconnect the fuel line and the electrical connector of the fuel pump, as shown in the video. At this point, we unscrew the pump nut to remove it from the tank, replacing the float pump with the new original one; finally, we reassemble everything!


Posted on 27 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Zafira 2005-2011 - Where is the fuel pump of the Opel Zafira located? Read Answer
    • Zafira 2005-2011 - What problems could the fuel pump of the Opel Zafira have? Read Answer
    • Zafira 2005-2011 - Where is the fuel pump of the Opel Zafira located? Read Answer
    • Zafira 1999-2005 - What is the location of the fuel pump on the Opel Zafira? Read Answer
    • Zafira 1999-2005 - Where is the fuel pump located in the Opel Zafira A? Read Answer
    • Zafira 2011-2019 - Where is the fuel pump located in the Opel Zafira? Read Answer
    • Zafira 2011-2019 - Where is the petrol pump of the Opel Zafira Tourer located? Read Answer
    • Zafira 1999-2005 - Where is the petrol pump of the Opel Zafira A located? Read Answer
    • Zafira 2005-2011 - How much does it cost to replace the fuel pump on an Opel Zafira? Read Answer
    • Zafira 2005-2011 - How much does an Opel Zafira diesel pump cost? Read Answer
    • Zafira 2005-2011 - Where is the petrol pump of the Opel Zafira 1600 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos