Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Door trim panel

Peugeot 106 - Door trim panel

Door Trim Panel Peugeot 106 (1991-2004 / mk 1)

Peugeot 106 (1991-2004 / MK 1)
How do you remove the door panel trim of the Peugeot 106 2?
Disassembling the panel of the car in question is not a complicated job at all, and if we want, we can do it independently and in a short amount of time. Let's …Read all…
Posted on 23 April 2025 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
How to Remove the Tailgate Panel on a Peugeot 106
In this video tutorial, you will learn how to remove the tailgate panel on a Peugeot 106, following the instructions below. First, open the rear tailgate and …Read all…
Posted on 23 June 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
How to Remove the Door Panel of the Peugeot 106?
To remove the door panel of the Peugeot 106, use a lever tool to detach the plastic cover around the internal handle. Next, loosen the Torx screws at the …Read all…
Posted on 11 June 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
Remove the Door Panel and Lock of a Peugeot 106
Remove the door panel and lock of a Peugeot 106. Use a screwdriver to undo the screws located in the space of the upper door opening lever and the screws in …Read all…
Posted on 27 March 2026 by ScegliAuto
Alternator (1) Shocks (5) Air conditioning (1) Car stereo (4) Anti-roll bar (3) Ignition coil (1) Control arm (1) Spark plugs (2) Key (3) Timing belt (1) Checks and maintenance (5) Dashboard (1) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Fuel filter (2) Diesel fuel filter (1) Oil filter (1) Clutch (1) Fuel injectors (2) Headlight bulb (1) Antifreeze coolant (1) Exhaust muffler (1) Engine (1) Starter motor (5) Engine oil (2) Clock (1) Door trim panel (4) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (1) Car door (1) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (1) Side mirror (2) Warning light – error code (2) Service warning light (2) Drivetrain (1) Side window (2) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos