Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Door trim panel

In this video tutorial, you will learn how to remove the tailgate panel on a Peugeot 106, following the instructions below. First, open the rear tailgate and unscrew the fastening screws found inside the holes of the panel using a cross screwdriver; then, use something thin to pry at the sides to remove it, as shown in the video. At this point, remove the plastic clips found on the tailgate body and replace them with new ones; apply the reverse procedure for reassembly!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…
Disassembly of the side glass of the Peugeot 106
Disassembly of the side glass of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the side glass of the front door of the Peugeot 106. First o…
How to Remove the Rear Light from a Peugeot 106
How to Remove the Rear Light from a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) How to remove the rear light from a Peugeot 106? This is a very simple operation, follow these steps: open the boot lid, then remove the cloth coveri…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos