Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 106
  6. : Pump

Peugeot 106 - Pump

Pump Peugeot 106 (1991-2004 / mk 1)

Peugeot 106 (1991-2004 / MK 1)
Replacement of Brake Master Cylinder

The brake master cylinder is fixed to the brake booster (a device that uses vacuum to reduce the force required on the pedal) and houses the reservoir for the …Read all…
Posted on 20 February 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
Instructions for Removing the Fuel Pump

To access the fuel pump, it is necessary to remove the rear seat cushions: the pump is located inside the tank and is protected by a rubber cap. Remove the …Read all…
Posted on 20 February 2026 by ScegliAuto

Alternator (1) Shocks (5) Air conditioning (1) Car stereo (4) Anti-roll bar (3) Ignition coil (1) Control arm (1) Spark plugs (2) Key (3) Timing belt (1) Checks and maintenance (5) Dashboard (1) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Fuel filter (2) Diesel fuel filter (1) Oil filter (1) Clutch (1) Fuel injectors (2) Headlight bulb (1) Antifreeze coolant (1) Exhaust muffler (1) Engine (1) Starter motor (5) Engine oil (2) Clock (1) Door trim panel (4) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (1) Car door (1) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (1) Side mirror (2) Warning light – error code (2) Service warning light (2) Drivetrain (1) Side window (2) Steering wheel (1)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos