Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Brake pads

Peugeot 106 - Brake pads

Brake Pads Peugeot 106 (1991-2004 / mk 1)

Peugeot 106 (1991-2004 / MK 1)
How to Replace Brake Pads on a Peugeot 106
Before starting, engage first gear and activate the handbrake on your Peugeot 106. Begin by lifting the car. Next, unscrew and remove the bolts that secure the …Read all…
Posted on 8 May 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
How to Change the Front Brake Pads on Peugeot 106
Changing the brake pads on the Peugeot 106? Let’s look at the disassembly of the rear brake pads. Lift the car with a jack to the desired height, remove the …Read all…
Posted on 27 April 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
How to Remove the Front Brake Caliper
The following video illustrates in a few brief and concise steps how to remove the front brake caliper of a car. In the images, you can see that the vehicle is …Read all…
Posted on 7 March 2026 by ScegliAuto
Alternator (1) Shocks (5) Air conditioning (1) Car stereo (4) Anti-roll bar (3) Ignition coil (1) Control arm (1) Spark plugs (2) Key (3) Timing belt (1) Checks and maintenance (5) Dashboard (1) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Fuel filter (2) Diesel fuel filter (1) Oil filter (1) Clutch (1) Fuel injectors (2) Headlight bulb (1) Antifreeze coolant (1) Exhaust muffler (1) Engine (1) Starter motor (5) Engine oil (2) Clock (1) Door trim panel (4) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (1) Car door (1) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (1) Side mirror (2) Warning light – error code (2) Service warning light (2) Drivetrain (1) Side window (2) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos