Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Brake pads

Before starting, engage first gear and activate the handbrake on your Peugeot 106. Begin by lifting the car. Next, unscrew and remove the bolts that secure the wheel to the hub, then remove the wheel itself. After this, remove the brake pad clip. Then, push back the brake pistons using a large flathead screwdriver as a lever. At this point, you can remove the worn brake pads, completing the disassembly. To install the new pads and reassemble everything, simply repeat this straightforward process in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on Peugeot 106
How to Change the Front Brake Pads on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Changing the brake pads on the Peugeot 106? Let’s look at the disassembly of the rear brake pads. Lift the car with a jack to the desired height, rem…
How to start a Peugeot 106?
How to start a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) To start a Peugeot 106, follow these steps. Make sure the car is in neutral and the handbrake is pulled. Insert the key into the ignition and turn th…
Where is the OBD2 port located in the Peugeot 106?
Where is the OBD2 port located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) If you own a Peugeot 106 and want to easily find the OBD2 port in the car, all you have to do is follow the steps described in the following guide. F…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos