Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Brake Caliper

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Brake pads

Video tutorial

The following video illustrates in a few brief and concise steps how to remove the front brake caliper of a car. In the images, you can see that the vehicle is already on a lift and the wheel has been removed. To begin, loosen the two 19 mm bolts that secure the caliper bracket; at this point, you can proceed with the removal process.

A useful tip, once this operation is complete, is to ensure that the caliper is securely attached when reinstalled, so it does not pull too much on the brake hose.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Change the Front Brake Pads on Peugeot 106
How to Change the Front Brake Pads on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Changing the brake pads on the Peugeot 106? Let’s look at the disassembly of the rear brake pads. Lift the car with a jack to the desired height, rem…
Replacement of Brake Discs and Front Pads
Replacement of Brake Discs and Front Pads
Peugeot 106 (1991-2004 / MK 1) Lift the vehicle on suitable axle stands (loosen the wheel bolts before lifting the vehicle) and remove the wheels. Remove the retaining clip and the…
Instructions for Removing the Front Shock Absorber
Instructions for Removing the Front Shock Absorber
Peugeot 106 (1991-2004 / MK 1) To remove the front shock absorber, lift the vehicle on a hydraulic lift, remove the front wheel, free the hub from the suspension wishbone ball join…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos