Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Front bumper

Peugeot 106 - Front bumper

Front Bumper Peugeot 106 (1991-2004 / mk 1)

Peugeot 106 (1991-2004 / MK 1)
Instructions for Removing the Front Bumper
To comfortably remove the front bumper, it is suggested to lift the vehicle on suitable car stands (or on a ramp) and remove the front wheels; at this point, …Read all…
Posted on 24 February 2026 by ScegliAuto
Peugeot 106 (1991-2004 / MK 1)
Front Bumper Replacement
Using a ratchet, start removing the screws inside the engine bay. Lift the vehicle with a jack and remove all screws; the anchor points are distributed around …Read all…
Posted on 12 February 2026 by ScegliAuto
Alternator (1) Shocks (5) Air conditioning (1) Car stereo (4) Anti-roll bar (3) Ignition coil (1) Control arm (1) Spark plugs (2) Key (3) Timing belt (1) Checks and maintenance (5) Dashboard (1) Brake rotors (1) Headlight (1) Tail light (4) Fog lights (1) Fuel filter (2) Diesel fuel filter (1) Oil filter (1) Clutch (1) Fuel injectors (2) Headlight bulb (1) Antifreeze coolant (1) Exhaust muffler (1) Engine (1) Starter motor (5) Engine oil (2) Clock (1) Door trim panel (4) Front bumper (2) Brake pads (3) Tires (1) Pump (2) Fuel pump (1) Car door (1) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (1) Side mirror (2) Warning light – error code (2) Service warning light (2) Drivetrain (1) Side window (2) Steering wheel (1)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos