Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 106
  6. : Front bumper removal instructions

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Front bumper
Operation: Front bumper removal instructions

To be able to comfortably remove the front bumper, it is suggested to lift the car on special stands for cars (or on the bridge) and remove the front wheels; At this point it is necessary to intercept the fixing pins of the bumper itself and remove them: these pins are located immediately under the headlights (and it could be advisable to remove the headlights themselves, at least the driver's side) and under the mudguards; once the pins have been removed, move the bumper away from its seat just enough to be able to disconnect the power sockets of the fog lights and complete their disassembly.


Posted on 21 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos