Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Front bumper replacement

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Front bumper
Operation: Front bumper replacement

With a ratchet wrench, start removing the screws inside the engine. Lift the car with a jack and remove all the screws, the anchor points are distributed around the bumper, under the car and behind the mudguard. Remove the two light assemblies. The entire bumper can now be removed very gently. Start by lifting one corner and then unhook all the plastic retaining clips. To fit the new bumper, proceed in the reverse order. After positioning the bumper on the front of the car, push firmly on the edges in order to engage the plastic clips. Refit all screws.


Posted on 19 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos