Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Headlight bulb

In this model, replacing the front headlamp bulb is quite simple and quick, even though the available space may seem limited. After lifting the bonnet, move the soft plastic cover located behind the headlamp in question to access the bulb connectors. Disconnect the connectors and the spring clip that holds the bulb in place, allowing you to remove the bulb and replace it with a new one. Once the new bulb is in position, secure it with the previously removed spring clip, reconnect the connectors, and reposition the plastic cover.

Updated on 22 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of Rear Headlight Bulb
Replacement of Rear Headlight Bulb
Peugeot 106 (1991-2004 / MK 1) Remove the rear headlight from the boot. Once the rear hatch is open, remove the plastic grille located directly in front of the rear headlight, then…
Instructions for Removing Front Headlamp
Instructions for Removing Front Headlamp
Peugeot 106 (1991-2004 / MK 1) Removing the front headlamp is very simple and requires no special tools, as it is simply clipped into its housing via two pins on the wing and one o…
Front Bumper Replacement
Front Bumper Replacement
Peugeot 106 (1991-2004 / MK 1) Using a ratchet, start removing the screws inside the engine bay. Lift the vehicle with a jack and remove all screws; the anchor points are distribut…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos