Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 106
  6. : Front headlight disassembly instructions

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Headlight
Operation: Front headlight disassembly instructions

The disassembly of the headlight is very simple to carry out and does not require any special tools, since it is simply inserted in its seat through two pegs on the fender side and one on the mask side (check for the presence of any split pins); to be able to disassemble the headlight, therefore, open the front hood and release the peg from the grille side by levering with a screwdriver; repeat the same operation on the fender side to release the other two pegs, one upper and one lower. At this point, pull the headlight forward to remove it from its seat and be able to disconnect the sockets.


Posted on 13 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos