Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Front seat disassembly instructions

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Seat
Operation: Front seat disassembly instructions

The disassembly of the front seat is very simple to carry out: it is in fact a question of disassembling the fixing pins (they are of the torx type) of the sliding rails of the seat itself; then slide the seat fully forward by lifting the backrest in order to access the rear pins which must be unscrewed; then move the seat all the way back to reach the front fixing pins and remove them, disconnect the seat belt pretensioner socket and remove the seat from the passenger compartment, complete with sliding rails; at this stage, be careful not to damage the surrounding plastics.


Posted on 18 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos