Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlight Bulb

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Tail light

Remove the rear headlight from the boot. Once the rear hatch is open, remove the plastic grille located directly in front of the rear headlight, then unscrew the two plastic rings (one outside the trim and the other inside) and pull the headlight away from its housing. At this point, disconnect the connector to completely remove it; unclip the bulb holder and proceed with replacing the bulbs (bayonet fitting). It is advisable to check the proper functioning of all bulbs before reassembling.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light and Bulb on the Peugeot 106
How to Replace the Rear Light and Bulb on the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) To remove the rear light, open the boot and using a star screwdriver, unscrew the grille located on the side of the light. Rotate the plastic nut and…
Replacing the Front Headlamp Bulb
Peugeot 106 (1991-2004 / MK 1) In this model, replacing the front headlamp bulb is quite simple and quick, even though the available space may seem limited. After lifting the bonne…
How to Remove the Rear Light from a Peugeot 106
How to Remove the Rear Light from a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) How to remove the rear light from a Peugeot 106? This is a very simple operation, follow these steps: open the boot lid, then remove the cloth coveri…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos