Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light and Bulb on the Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Tail light

To remove the rear light, open the boot and using a star screwdriver, unscrew the grille located on the side of the light. Rotate the plastic nut and extract the light when the nut has reached its limit. Remove the light from its housing, disconnect the main connector to replace the bulbs; you need to unclip the cover of the interior light and disconnect the bulb from its connector and follow through with the replacement. After replacing the bulb, refit the light and insert it back into its housing. If the bulb does not work, check the fuse.

Posted on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light from a Peugeot 106
How to Remove the Rear Light from a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) How to remove the rear light from a Peugeot 106? This is a very simple operation, follow these steps: open the boot lid, then remove the cloth coveri…
How to Remove the Rear Light of a Peugeot 106
How to Remove the Rear Light of a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this video tutorial, we will show you how to remove the rear light of a Peugeot 106 produced from 1991 to 2004. To begin, open the boot and with t…
Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos