Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Tail light

In this video tutorial, we will show you how to remove the rear light of a Peugeot 106 produced from 1991 to 2004. To begin, open the boot and with the help of a small flat screwdriver, remove the plastic cover of the wiring, and then, using a cross screwdriver, unscrew the ventilation duct. Once done, also unscrew the two plastic clips that hold the rear light in place, then disconnect the wiring connector by pressing a small metal rod, and finally, pull the light towards you to remove it from its housing, completing the job.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light from a Peugeot 106
How to Remove the Rear Light from a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) How to remove the rear light from a Peugeot 106? This is a very simple operation, follow these steps: open the boot lid, then remove the cloth coveri…
How to Replace the Rear Light and Bulb on the Peugeot 106
How to Replace the Rear Light and Bulb on the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) To remove the rear light, open the boot and using a star screwdriver, unscrew the grille located on the side of the light. Rotate the plastic nut and…
Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos