Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Fuel pump

Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear bench to access the fuel pump by removing the plastic cover, as shown in the video. Now disconnect the fuel pipe and the electrical connector for the fuel level sensor; remove and replace the fuel pump with the new one, applying the reverse procedure!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…
How to start a Peugeot 106?
How to start a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) To start a Peugeot 106, follow these steps. Make sure the car is in neutral and the handbrake is pulled. Insert the key into the ignition and turn th…
Instructions for Removing the Fuel Pump
Instructions for Removing the Fuel Pump
Peugeot 106 (1991-2004 / MK 1) To access the fuel pump, it is necessary to remove the rear seat cushions: the pump is located inside the tank and is protected by a rubber cap. Remo…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos