Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : How to change the fuel filter on Peugeot 106

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Petrol filter
Operation: How to change the fuel filter on Peugeot 106

Let's see how to change the fuel filter of the Peugeot 106. We raise the car with a lifting jack, then we identify the position of the fuel filter. We disconnect the cables and the various pipes from the fuel filter (we unhook the filter from inside its housing). Once the filter has been removed, remove it from the car and replace it with a new filter. We mount the filter to the attached container of the petrol filter (we connect pipes and cables) and tighten the special hooks. We bring the car to the ground and test the operation of the vehicle (we start the engine with the ignition key).


Posted on 23 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 106 1991-2004 - Where is the fuel filter of the Peugeot 106? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos