Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on the Peugeot 106 - Citroen Saxo

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Fuel filter

Discover the main steps to remove and replace the fuel filter on the Peugeot 106, as well as on the Citroen Saxo 1.1, in this brief and simple guide. First, locate the fuel filter; then disconnect the inlet and outlet pipes, allowing any excess fuel to drain. Next, disconnect the indicated electrical connector and remove the filter from its bracket; finally, replace it with the correct new one, inserting it back into the bracket and reconnecting the pipes (check the condition of these pipes: replace them if damaged).

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…
How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…
How to replace the front side window of a Peugeot 106.
How to replace the front side window of a Peugeot 106.
Peugeot 106 (1991-2004 / MK 1) .. side glass of the Peugeot 106, as well as the Citroen Saxo. First, let's open the front door of the vehicle and start removing the door panel by unscrewing.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos