Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Tail light

How to remove the rear light from a Peugeot 106? This is a very simple operation, follow these steps: open the boot lid, then remove the cloth covering on the side trim of the boot. Unscrew the securing nuts of the rear light (using a suitable spanner), disconnect the power connectors attached to the light and pull it away from its housing. Replace any damaged bulbs with new ones (same voltage) at hand. Refit the light with the respective securing nuts, reattach the cloth covering, and finally test the correct operation of the lights.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…
How to Remove the Rear Light of a Peugeot 106
How to Remove the Rear Light of a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this video tutorial, we will show you how to remove the rear light of a Peugeot 106 produced from 1991 to 2004. To begin, open the boot and with t…
How to Replace the Rear Light and Bulb on the Peugeot 106
How to Replace the Rear Light and Bulb on the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) To remove the rear light, open the boot and using a star screwdriver, unscrew the grille located on the side of the light. Rotate the plastic nut and…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos