Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 306
  6. : Service warning light

Peugeot 306 - Service warning light

Service Warning Light Peugeot 306 (1993-2002 / mk 1)

Peugeot 306 (1993-2002 / MK 1)
How to reset the service light on a 1998 Peugeot 306

The reset of the service light on a 1998 Peugeot 308 vehicle follows very simple steps. The first step is to keep the vehicle's ignition and engine off. The …Read all…
Posted on 1 February 2025 by ScegliAuto

Airbag (1) Antenna (2) Anti-roll bar (1) Body (1) Key (1) Checks and maintenance (2) Bearing (1) Light bulb (1) Interior dome light bulb (1) Instrument panel light (1) Handle (1) Exhaust muffler (1) Engine (1) Power window motor (3) Starter motor (1) Door trim panel (5) Brake pads (1) Fuel pump (4) Car door (1) Fuse box (10) Axle shaft (1) Side mirror (1) Warning light – error code (1) Service warning light (1) Brake drums and shoes (1) Windshield wipers (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos