Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 306
  6. : Fuel pump

Peugeot 306 - Fuel pump

Fuel Pump Peugeot 306 (1993-2002 / mk 1)

Peugeot 306 (1993-2002 / MK 1)
Replacing the Fuel Pump Relay on a Peugeot 306

To replace the fuel pump relay on our Peugeot 306, open the bonnet and secure it with the appropriate prop to work safely. Once located, near the dashboard, …Read all…
Posted on 2 October 2026 by ScegliAuto
Peugeot 306 (1993-2002 / MK 1)
Replacing the Fuel Pump on the Peugeot 306

Below are the instructions on how to remove and replace the fuel pump on the Peugeot 306. First, open the rear hatch of your car and start by removing the rear …Read all…
Posted on 12 September 2026 by ScegliAuto
Peugeot 306 (1993-2002 / MK 1)
How to Change the Fuel Pump on a Peugeot 306 2.0 HDI

Today, we will see in this brief and simple guide the steps that will allow us to remove and replace the low-pressure fuel pump on the Peugeot 306 2.0 HDI. …Read all…
Posted on 18 August 2026 by ScegliAuto
Peugeot 306 (1993-2002 / MK 1)
Replacing the Fuel Pump on Peugeot 306

Let’s see how to remove the fuel pump on a Peugeot 306. Disconnect the battery cables, then remove the rear seat cushions: the fuel pump is located …Read all…
Posted on 23 May 2026 by ScegliAuto

Airbag (1) Antenna (2) Anti-roll bar (1) Body (1) Key (1) Checks and maintenance (2) Bearing (1) Light bulb (1) Interior dome light bulb (1) Instrument panel light (1) Handle (1) Exhaust muffler (1) Engine (1) Power window motor (3) Starter motor (1) Door trim panel (5) Brake pads (1) Fuel pump (4) Car door (1) Fuse box (11) Axle shaft (1) Side mirror (1) Warning light – error code (1) Service warning light (1) Brake drums and shoes (1) Windshield wipers (1) Blower motor (1)

How to Replace the Battery in a 2022 Toyota Yaris Cross

The battery in the 2022 Toyota Yaris Cross is located under the front bonnet, next to the engine. To replace the battery, open the bonnet and remove the cover on the battery by pressing on the sides. After removing the cover, use a 13mm socket to undo the negative terminal nut, followed by the positive terminal. Remove the old battery and insert the new one. Connect the positive and negative terminals to restore battery function. Close the cover and start the vehicle to test its operation.

Watch the video!


by ScegliAuto

More videos