Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 306
    4. : Replace fuel pump on Peugeot 306

Peugeot 306 - Video tutorial

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Fuel pump
Operation: Replace fuel pump on Peugeot 306

Let's see how to remove the fuel pump on a Peugeot 306. We disconnect the battery cables, then, we remove the seats of the rear seats of the car: under there is the fuel pump. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. Unscrew the fuel pump clamp, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat with attached pieces. At the end of the assembly, we test the functioning of the pump.


Posted on 8 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 306 1993-2002 - Where is the Peugeot 306 fuel pump relay located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos