Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump Relay on a Peugeot 306

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Fuel pump

To replace the fuel pump relay on our Peugeot 306, open the bonnet and secure it with the appropriate prop to work safely. Once located, near the dashboard, proceed to unlock the old relay from its seat by unscrewing the fastening nut, using a handy ratchet spanner. Remove the safety pin that secures the slide holding it to its connector, allowing you to remove it. Insert the new connector, ensuring the correct positioning, secure it with the red slide, and reinsert the pin. All that remains is to screw the fastening nut back on and check the correct operation.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on Peugeot 306
Replacing the Fuel Pump on Peugeot 306
Peugeot 306 (1993-2002 / MK 1) Let’s see how to remove the fuel pump on a Peugeot 306. Disconnect the battery cables, then remove the rear seat cushions: the fuel pump is located u…
How to Change the Fuel Pump on a Peugeot 306 2.0 HDI
How to Change the Fuel Pump on a Peugeot 306 2.0 HDI
Peugeot 306 (1993-2002 / MK 1) Today, we will see in this brief and simple guide the steps that will allow us to remove and replace the low-pressure fuel pump on the Peugeot 306 2.…
Replacing the Fuel Pump on the Peugeot 306
Replacing the Fuel Pump on the Peugeot 306
Peugeot 306 (1993-2002 / MK 1) Below are the instructions on how to remove and replace the fuel pump on the Peugeot 306. First, open the rear hatch of your car and start by removin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos