Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuel Pump on a Peugeot 306 2.0 HDI

Model: Peugeot 306 MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuel pump

Video tutorial

Today, we will see in this brief and simple guide the steps that will allow us to remove and replace the low-pressure fuel pump on the Peugeot 306 2.0 HDI. First, remove the rear seat of the vehicle, gaining access to the fuel pump located underneath; then disconnect the electrical connector of the float, followed by disconnecting the fuel tank line and the supply line, as shown in the video.

At this point, unscrew the fuel pump retaining ring to remove it from the tank; then install the new float pump, as well as its original replacement!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Peugeot 306 (1993-2002 / MK 1) Let’s see how to remove the fuel pump on a Peugeot 306. Disconnect the battery cables, then remove the rear seat cushions: the fuel pump is located u…
Peugeot 306 (1993-2002 / MK 1) Below are the instructions on how to remove and replace the fuel pump on the Peugeot 306. First, open the rear hatch of your car and start by removin…
Peugeot 306 (1993-2002 / MK 1) In today's video, you will see the main instructions that will allow you to remove and replace the entire engine block of the Peugeot 306 HDI. First,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Battery in a 2022 Toyota Yaris Cross

The battery in the 2022 Toyota Yaris Cross is located under the front bonnet, next to the engine. To replace the battery, open the bonnet and remove the cover on the battery by pressing on the sides. After removing the cover, use a 13mm socket to undo the negative terminal nut, followed by the positive terminal. Remove the old battery and insert the new one. Connect the positive and negative terminals to restore battery function. Close the cover and start the vehicle to test its operation.

Watch the video!


by ScegliAuto

More videos