Do it yourself
| ||||
|
Peugeot 306 - Video tutorial
Model: Peugeot 306
MK 1
- Years 1993-2002 In today's video we will see the main instructions that will allow us to disassemble and replace the entire engine block of the Peugeot 306 HDI. First of all, we open the bonnet of our car and begin to disassemble and remove the front bumper and the lights; to do this we unscrew all the fixing screws and disconnect the electrical connectors. At this point we are going to unscrew the screws of the motor support, lifting it from below; we raise the car and remove the front wheels, disconnecting both front axle shafts. Now we disconnect the engine from the gearbox to remove it later with a jack!
Posted on 21 August 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |