Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 1998 Peugeot 306

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Service warning light

The reset of the service light on a 1998 Peugeot 308 vehicle follows very simple steps. The first step is to keep the vehicle's ignition and engine off. The second step is to press the button located on the left side of the dashboard display and wait for the countdown to begin. The third step is to keep the button pressed until the reset of the maintenance light is complete. After completing the three aforementioned steps, you can turn off and turn on the dashboard again to finish resetting the service light.

Posted on 1 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key fob case of a Peugeot 306
How to replace the key fob case of a Peugeot 306
Peugeot 306 (1993-2002 / MK 1) In case the casing of the key for your Peugeot 306 car needs to be replaced, the procedure is not complicated. First, you will need to unscrew the sm…
Where is the OBD port located on the Peugeot 306?
Where is the OBD port located on the Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) The Peugeot 306 has a diagnostic socket inside, also known as an OBD socket. The following video tutorial shows us the location and how to use this s…
Guide to Removing the Front Door of a Peugeot 306
Guide to Removing the Front Door of a Peugeot 306
Peugeot 306 (1993-2002 / MK 1) The steps outlined in this guide will show you the procedure for removing and replacing the door of a Peugeot 306. First, open the front door and beg…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos