Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : -board computer

Peugeot Expert - -board computer

Peugeot Expert (2016-2024 / Mark3, MK 3)
How to reset the service light on the 2018 Peugeot Expert
On all Peugeot vehicles, the procedure to reset the service light is similar. To reset the service light on the 2018 Peugeot Expert, first turn off the …read all…
Posted on 8 March 2024 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
How to change the system language of Peugeot Expert 2.
If you own a Peugeot Expert Mk2 and want to learn how to manually change the system language used in the menu, then you just need to follow these steps. First, …read all…
Posted on 12 June 2023 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
How to reset the service on the Peugeot Expert?
Each time we replace the oil and filter required by the coupon, it will be necessary to delete the service indication on the instrument panel, to do this it is …read all…
Posted on 9 May 2024 by ScegliAuto
Peugeot Expert (2016-2024 / Mark3, MK 3)
How to reset the AdBlue warning light on the Peugeot Expert
Adblue is the additive that is used to reduce nitrogen oxide emissions in diesel engines. Passenger cars of the latest generation have an additional tank for …read all…
Posted on 25 April 2024 by ScegliAuto
Car stereo (1) Battery (1) Timing belt (2) -board computer (4) Checks and maintenance (19) Air filter (1) Cabin air filter (2) Diesel filter (2) Clutch (1) Rear light bulb (1) Handle (1) Starter motor (2) Door panel (2) Brake pads (1) Instrument cluster (8) Fuse box (14) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos