Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Front bumper

Peugeot Expert - Front bumper

Front Bumper Peugeot Expert (2016-2025 / mark 3, mk 3)

Peugeot Expert (2008-2016 / Mark2, MK 2)
How to Remove the Front Bumper from a Peugeot Expert
This guide provides instructions on how to remove and replace the front bumper of a Peugeot Expert. First, open the vehicle's bonnet and start removing all the …Read all…
Posted on 21 September 2026 by ScegliAuto
Peugeot Expert (2016-2025 / Mark3, MK 3)
How to disassemble the front bumper of the Peugeot Expert
In this video we can see how to disassemble the front bumper of a Peugeot Expert: we open the hood and remove the upper bolts: 2 on the sides and others under …Read all…
Posted on 29 July 2025 by ScegliAuto

Front Bumper Peugeot Expert (2008-2016 / mark 2, mk 2)

Peugeot Expert (2008-2016 / Mark2, MK 2)
How to Remove the Front Bumper from a Peugeot Expert
This guide provides instructions on how to remove and replace the front bumper of a Peugeot Expert. First, open the vehicle's bonnet and start removing all the …Read all…
Posted on 21 September 2026 by ScegliAuto
Peugeot Expert (2016-2025 / Mark3, MK 3)
How to disassemble the front bumper of the Peugeot Expert
In this video we can see how to disassemble the front bumper of a Peugeot Expert: we open the hood and remove the upper bolts: 2 on the sides and others under …Read all…
Posted on 29 July 2025 by ScegliAuto
Car stereo (3) Battery (2) Body (1) Glove compartment (1) Key (1) Timing belt (3) Onboard computer (3) Checks and maintenance (7) Headlight (1) Air filter (4) Cabin air filter (4) Diesel fuel filter (2) Parking brake (1) Clutch (4) Headlight bulb (3) Tail light bulb (2) Handle (2) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (14) Door trim panel (3) Front bumper (2) Brake pads (1) Pump (1) Car door (3) Radiator (1) Fuse box (28) Side mirror (1) AdBlue warning light (5) Warning light – error code (10) Tire pressure warning light (5) Service warning light (52) Blower motor (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos