Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Timing belt

Peugeot Expert - Timing belt

Peugeot Expert (2016-2024 / Mark3, MK 3)
Guide to replacing the timing belt of the Peugeot Expert HDI
Today's instructions will show us the main steps on how to disassemble and replace the timing belt of the Peugeot Expert HDI. First, we open the hood of the …read all…
Posted on 29 February 2024 by ScegliAuto
Peugeot Expert (2016-2024 / Mark3, MK 3)
How do you replace the timing belt of the Peugeot Expert?
The replacement of the timing belt of the Peugeot Expert is done by opening the hood, in order to have access to the components located inside the engine …read all…
Posted on 17 May 2023 by ScegliAuto
Car stereo (1) Battery (1) Timing belt (2) -board computer (4) Checks and maintenance (19) Air filter (1) Cabin air filter (2) Diesel filter (2) Clutch (1) Rear light bulb (1) Handle (1) Starter motor (2) Door panel (2) Brake pads (1) Instrument cluster (8) Fuse box (14) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos