Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Peugeot Expert HDI

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

Today's instructions will show you the main steps on how to remove and replace the timing belt on the Peugeot Expert HDI. First, open the vehicle's bonnet and begin by removing the engine mount. Remove the serpentine belt and detach the crankshaft pulley, as shown in the video.

Now, remove the timing cover to take out and replace the belt with a new one, taking the necessary references for the subsequent timing of the engine, following the video tutorial to the end for reassembly!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Peugeot Expert?
How to Replace the Timing Belt on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) To replace the timing belt on the Peugeot Expert, open the bonnet to access the components in the engine bay. On the left side, locate the plastic pr…
How to Replace the Timing Belt on a Peugeot Expert
How to Replace the Timing Belt on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) The timing belt should not be replaced upon failure but at the first signs of wear. Replacing the belt on a Peugeot Expert is a task that can be easi…
Guide to Adjusting the Rear Doors of the Peugeot Expert
Guide to Adjusting the Rear Doors of the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) This guide provides instructions on how to adjust the rear doors of the Peugeot Expert. First, move to the rear of the vehicle and open both doors; o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos