Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Adjusting the Rear Doors of the Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years 2008-2016
Part: Car door

This guide provides instructions on how to adjust the rear doors of the Peugeot Expert. First, move to the rear of the vehicle and open both doors; over time, the doors may not close properly due to hinge wear. Loosen the hinge screws while holding the doors up to level them correctly; then retighten the hinge screws and ensure both rear doors close perfectly.

Posted on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Peugeot Expert HDI
Guide to Replacing the Timing Belt on the Peugeot Expert HDI
Peugeot Expert (2016-2025 / Mark3, MK 3) Today's instructions will show you the main steps on how to remove and replace the timing belt on the Peugeot Expert HDI. First, open the vehicle's b…
How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to replace the air filter in the 2016 Peugeot Expert
How to replace the air filter in the 2016 Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) In this guide dedicated to all owners of a 2016 Peugeot Expert, you will learn how to correctly replace the engine air filter. First, turn off the ve…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos