Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Cabin air filter

Peugeot Expert - Cabin air filter

Cabin Air Filter Peugeot Expert (2008-2016 / mark 2, mk 2)

Peugeot Expert (2008-2016 / Mark2, MK 2)
How to Change the Cabin Air Filter in a Peugeot Expert
To replace the cabin air filter on a Peugeot Expert, open the bonnet and locate the filter compartment, situated at the base of the windscreen, under the …Read all…
Posted on 3 August 2026 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
How to Replace the Cabin Air Filter on a Peugeot Expert
With this guide, you will be able to replace the cabin air filter on your Peugeot Expert yourself. Before starting the various steps, ensure that the vehicle …Read all…
Posted on 14 April 2026 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
Replacing the Cabin Air Filter on the Peugeot Expert MK2
To keep dust and dirt out of the air conditioning system of the Peugeot Expert, a filter is fitted to the intake. Replace it every fifteen thousand miles or …Read all…
Posted on 18 September 2026 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
Replacement of Car Cabin Air Filter
Replacing the air filter is part of routine maintenance. It is simple to replace; just follow the steps in the guide below carefully. By doing this, you can …Read all…
Posted on 26 February 2026 by ScegliAuto
Car stereo (3) Battery (2) Body (1) Glove compartment (1) Key (1) Timing belt (3) Onboard computer (3) Checks and maintenance (7) Headlight (1) Air filter (4) Cabin air filter (4) Diesel fuel filter (2) Parking brake (1) Clutch (4) Headlight bulb (3) Tail light bulb (2) Handle (2) Starter motor (2) Transmission fluid (1) Engine oil (1) Clock (14) Door trim panel (3) Front bumper (2) Brake pads (1) Pump (1) Car door (3) Radiator (1) Fuse box (28) Side mirror (1) AdBlue warning light (5) Warning light – error code (10) Tire pressure warning light (5) Service warning light (52) Blower motor (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos