Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Starter motor

Peugeot Expert - Starter motor

Peugeot Expert (2008-2016 / Mark2, MK 2)
How to replace the starter motor in the Peugeot Expert van?
In this tutorial we can see how to replace the starter motor in the Peugeot Expert van, a simple operation after all. Before doing this, remove the panel …read all…
Posted on 26 May 2023 by ScegliAuto
Peugeot Expert (2008-2016 / Mark2, MK 2)
How to replace the starter motor on Peugeot Expert
Is the Peugeot Expert starter motor damaged? Let's see the disassembly of the motor. We open the engine hood, remove the air filter container to access the …read all…
Posted on 4 December 2023 by ScegliAuto
Car stereo (1) Battery (1) Timing belt (2) -board computer (4) Checks and maintenance (19) Air filter (1) Cabin air filter (2) Diesel filter (2) Clutch (1) Rear light bulb (1) Handle (1) Starter motor (2) Door panel (2) Brake pads (1) Instrument cluster (8) Fuse box (14) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos