Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Starter motor

See other generations:
Video tutorial

Is the starter motor of the Peugeot Expert damaged? Here’s how to remove it. Open the bonnet, remove the air filter housing to access the starter motor. Disconnect the battery terminals.

Disconnect the starter motor power terminals using pliers or a screwdriver, depending on the pressure of the tabs. Unscrew the securing bolts of the starter motor with a socket wrench and remove it from the engine bay. Install the new starter motor, connecting the power cables and the associated securing screws.

Reconnect the power terminals to the battery.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor in the Peugeot Expert Van?
How to Replace the Starter Motor in the Peugeot Expert Van?
Peugeot Expert (2008-2016 / Mark2, MK 2) In this tutorial, see how to replace the starter motor in the Peugeot Expert van, a relatively simple operation. Before doing this, remove the panel …
How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to Replace the Clutch on a Peugeot Expert
How to Replace the Clutch on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) You can replace the clutch on a Peugeot Expert by lifting the vehicle so that the front wheels are not in contact with the ground. Once the vehicle i…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos