Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Front bumper

See other generations:
Video tutorial

In this video we can see how to disassemble the front bumper of a Peugeot Expert: we open the hood and remove the upper bolts: 2 on the sides and others under the hood; release the 12 internal clips, hidden under the grille, which we will detach by pulling them gently towards the outside.

Lift the car and remove the lower bolts: the bumper is in two pieces (upper part and lower part); remove the bolts under the bumper and those in the wheel arch area 3/4 on each side.

Disconnect the electrical cables by disconnecting the connectors of the fog lights, parking sensors, and radar. At this point we can detach the bumper, removing it decisively to detach the remaining clips.


Posted on 30 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Peugeot Expert
How to Remove the Front Bumper from a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) This guide provides instructions on how to remove and replace the front bumper of a Peugeot Expert. First, open the vehicle's bonnet and start removi…
How to Remove the Front Door Panel of a Peugeot Expert
How to Remove the Front Door Panel of a Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) Briefly, we will see the instructions that will allow you to dismantle and remove the front door panel of the Peugeot Expert. First, open the front d…
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Peugeot Expert (2008-2016 / Mark2, MK 2) In this video tutorial, you will see the steps to remove the front door panel and the lock of the Peugeot Expert, as well as the Fiat Scudo. First, o…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos