Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

See other generations:
Video tutorial

Briefly, we will see the instructions that will allow you to dismantle and remove the front door panel of the Peugeot Expert. First, open the front door of the vehicle and start by removing the plastic cover of the handle by prying at the sides; then unscrew the fastening screws found inside using a screwdriver or Torx key, as shown in the video.

At this point, unscrew the additional screws located on the sides to detach and remove the door trim, disconnecting the handle cable; finally, refit the door panel.


Posted on 27 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Peugeot Expert (2008-2016 / Mark2, MK 2) In this video tutorial, you will see the steps to remove the front door panel and the lock of the Peugeot Expert, as well as the Fiat Scudo. First, o…
Guide to Adjusting the Rear Doors of the Peugeot Expert
Guide to Adjusting the Rear Doors of the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) This guide provides instructions on how to adjust the rear doors of the Peugeot Expert. First, move to the rear of the vehicle and open both doors; o…
How to Remove the External Handle of the Peugeot Expert?
How to Remove the External Handle of the Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To replace the external handle of the Peugeot Expert, open the door to access the bolt on the side of the door. Once this bolt is removed, you can sl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos