Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Peugeot Expert - Fiat Scudo

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will see the steps to remove the front door panel and the lock of the Peugeot Expert, as well as the Fiat Scudo. First, open the front door and start by removing the door panel; to do this, remove the triangular plastic cover of the mirror, then remove the cover of the grab handle and the window switch panel (disconnecting the electrical connector found underneath).

At this point, unscrew the screws located underneath, using leverage on the sides to remove the panel; follow the video to the end for the removal of the lock!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Replacing Rear Lights on Peugeot Expert, Citroen Jumpy and Fiat Scudo
Replacing Rear Lights on Peugeot Expert, Citroen Jumpy and Fiat Scudo
Peugeot Expert (2008-2016 / Mark2, MK 2) .. to replace the rear lights on the trio of vans: Fiat Scudo, Peugeot Expert, and Citroen Jumpy. The first step is to unscrew the two visible fasteners.. …
How to Remove and Replace the Radio in the Peugeot Expert
How to Remove and Replace the Radio in the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) .. radio in the Peugeot Expert, as well as in the Fiat Scudo. First, get inside the vehicle and start extracting the factory radio using the appropriate.. …
How to Remove the Door Panel on a Peugeot Expert
How to Remove the Door Panel on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) To remove the door panel on a Peugeot Expert, use a tool to pry off the cover of the internal handle housing and unscrew the underlying screw. Once t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos