Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Radio in the Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the factory radio in the Peugeot Expert, as well as in the Fiat Scudo. First, get inside the vehicle and start extracting the factory radio using the appropriate extraction tools to insert into the four holes of the radio; disconnect the electrical wiring found at the back, as shown in the video.

At this point, install the new radio, compatible with your vehicle, making modifications to the wiring if necessary; then check its correct operation!


Posted on 2 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Peugeot Expert HDI
Guide to Replacing the Timing Belt on the Peugeot Expert HDI
Peugeot Expert (2016-2025 / Mark3, MK 3) Today's instructions will show you the main steps on how to remove and replace the timing belt on the Peugeot Expert HDI. First, open the vehicle's b…
How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to remove the car radio of the Peugeot Expert
How to remove the car radio of the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) If you want to remove the standard car radio inside your latest model Peugeot Expert, just follow the procedure below and put into practice the steps…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos