Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio of the Peugeot Expert

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2025
Part: Car stereo

If you want to remove the standard car radio inside your latest model Peugeot Expert, just follow the procedure below and put into practice the steps described. First of all, enter the vehicle and make sure it is turned off, then remove the small central compartment located below the car radio. Once this simple operation is completed, insert metal sticks (or similar objects) into the four holes at the corners of the car radio and pull towards you. Finally, disconnect the electrical cable connected to the car radio and you're done.

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Radio in the Peugeot Expert
How to Remove and Replace the Radio in the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) In this guide, you will find instructions to remove and replace the factory radio in the Peugeot Expert, as well as in the Fiat Scudo. First, get ins…
How to Replace the Radio in a Peugeot Expert Van?
How to Replace the Radio in a Peugeot Expert Van?
Peugeot Expert (2016-2025 / Mark3, MK 3) In this tutorial, you will see how to replace the radio in a Peugeot Expert van, a very simple and quick operation. First, ensure the vehicle is turn…
How to Set the Clock in the 2010 Peugeot Expert
How to Set the Clock in the 2010 Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Adjusting the clock in the 2010 Peugeot Expert is a DIY task that does not require complex or lengthy operations; just a few seconds using the contro…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos