Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Lights on Peugeot Expert, Citroen Jumpy and Fiat Scudo

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Today, learn how to replace the rear lights on the trio of vans: Fiat Scudo, Peugeot Expert, and Citroen Jumpy. The first step is to unscrew the two visible fasteners as soon as you open the hinged door.

Next, pull off the cover, taking care to disconnect the power cables. Working directly on the lamp, remove the four clips from the bulb housing and replace the bulbs.

On the right side, you will find a standard P21/5W for the position and stop light, as well as the indicator and reverse light; however, on the left side, there is no reverse light but the fog light.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Change the Gear Oil on a Citroën Jumpy, Peugeot Expert, Fiat Scudo or Toyota Proace
How to Change the Gear Oil on a Citroën Jumpy, Peugeot Expert, Fiat Scudo or Toyota Proace
Peugeot Expert (2016-2025 / Mark3, MK 3) To change the gear oil on a Citroën Jumpy, Peugeot Expert, Fiat Scudo, and Toyota Proace, the procedure is similar across all models. The drain plug …
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Peugeot Expert (2008-2016 / Mark2, MK 2) In this video tutorial, you will see the steps to remove the front door panel and the lock of the Peugeot Expert, as well as the Fiat Scudo. First, o…
How to Remove and Replace the Radio in the Peugeot Expert
How to Remove and Replace the Radio in the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) In this guide, you will find instructions to remove and replace the factory radio in the Peugeot Expert, as well as in the Fiat Scudo. First, get ins…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos