Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle of the Peugeot Expert?

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Handle

See other generations:
Video tutorial

To replace the external handle of the Peugeot Expert, open the door to access the bolt on the side of the door. Once this bolt is removed, you can slide the lock cylinder out of its housing from inside.

After removing it, you will notice that the handle can be extracted from its seat. This allows you to insert the new handle and then the lock cylinder; everything must be secured with the bolt on the side of the door.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to remove the external handle on a Peugeot Expert van
How to remove the external handle on a Peugeot Expert van
Peugeot Expert (2008-2016 / Mark2, MK 2) In this tutorial, we will see how to remove the external handle on a Peugeot Expert van, an extremely simple and quick operation. First, open the doo…
How to Remove the Door Panel on a Peugeot Expert
How to Remove the Door Panel on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) To remove the door panel on a Peugeot Expert, use a tool to pry off the cover of the internal handle housing and unscrew the underlying screw. Once t…
How to Remove the Front Door Panel of a Peugeot Expert
How to Remove the Front Door Panel of a Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) Briefly, we will see the instructions that will allow you to dismantle and remove the front door panel of the Peugeot Expert. First, open the front d…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos