Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel on a Peugeot Expert, use a tool to pry off the cover of the internal handle housing and unscrew the underlying screw. Once this screw is loosened, you can detach the window switch panel and unscrew the fixing screw located beneath it: this will allow you to release the internal clips that secure the panel and disconnect the underlying connectors, completely removing it. This way, you can insert the new panel, securing and connecting it properly.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Removing the Door Panel of the Peugeot Expert - Fiat Scudo
Peugeot Expert (2008-2016 / Mark2, MK 2) In this video tutorial, you will see the steps to remove the front door panel and the lock of the Peugeot Expert, as well as the Fiat Scudo. First, o…
How to Remove the Front Door Panel of a Peugeot Expert
How to Remove the Front Door Panel of a Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) Briefly, we will see the instructions that will allow you to dismantle and remove the front door panel of the Peugeot Expert. First, open the front d…
How to Remove the Glove Compartment from a Peugeot Expert
How to Remove the Glove Compartment from a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) To remove the glove compartment from a Peugeot Expert, follow these steps: - Open the passenger door and remove the side cover of the dashboard. - Op…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos