Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install parking sensors on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Parking sensors

Video tutorial

In this video we see how to install parking sensors on a Peugeot 206: we start by positioning bodywork tape to take measurements of where the sensors will be inserted, which we found on Amazon for 12.84 euros, with free delivery for Prime customers, with code B07L1SBDVH. We will have to remove the rear bumper, and we will start by removing the rear wheel arch from both sides, then underneath we will find two 10 mm nuts on the sides of the exhaust pipe plus one hidden in the wheel arch (outer side): We then make holes in the bumper, making sure that the drill bit we use is the same size as the sensors.

Now we mount the sensors and run the cables from the fog light, which goes directly into the trunk; we reassemble the bumper and then position the control unit.

The positive power supply signal is taken from the reverse light, so we need to remove the rear light and connect to the white wire, then run the speaker wire to the rear seat so that it can be heard well in the cabin.


Posted on 28 November 2024 by ScegliAuto


Related tutorials

Timing Belt Replacement on Peugeot 206
Timing Belt Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the timing belt on the Peugeot 206 if it needs changing. Changing the timing belt is very important to avoid damaging the engine. Here’s how t…
How to Install Roof Bars on the Peugeot 206?
How to Install Roof Bars on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) As shown in this tutorial, installing roof bars on the Peugeot 206 is an extremely simple and quick operation. First, open both the front and rear do…
How to Remove the Alternator on a Peugeot 206?
How to Remove the Alternator on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will learn how to remove the alternator on a Peugeot 206, a straightforward operation that requires good manual skills. First, …

Other guides you may be interested in

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos